Complete Kit with Universal X-Grip Holder for iPad Pro & 12 inch Tablets

The new RAM X-Grip® line of products just got bigger and better. This new model is just what you've been looking for to hold your favourite tablet. Just like the devices it was made for, it is everything you need and nothing you don't. Simple to open and close, the spring loaded RAM X-Grip® leaves the outside edge of your tablet almost completely free of annoying obstructions. Soft rubber fingers apply just enough force to keep your tablet in safe and secure. Compatible with a wide range of mounting solutions, your tablet is sure to find a home no matter where your travels take you.

The RAM-HOL-UN11 holder expands and contracts for perfect fit of most 10” and 12" tablets with or without sleeves, as well as some smaller tablets. This holder by RAM® consists of a composite spring loaded holder, expandable grip arms and additional bottom support keeper.

Compatible Devices (WITH OR WITHOUT CASE):
Apple iPad Pro
Microsoft Surface Pro 3
Samsung Galaxy Note® Pro 12.2
Most 12" Screen Tablets

X-Grip® Holder Dimensions:

• Minimum Width = 184mm
• Maximum Width = 222mm
• Maximum Length (WITHOUT additional supports) = Unlimited
• Maximum Length (WITH additional supports) = 260mm Depth = 22mm

X-Grip® Holder Features:

1. Spring loaded holder expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of holder allows for attachment to many 1" socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the holder for quick release of your tablet
6. Multiple mounting access points on the back
7. Additional support keeper at the bottom
8. Full access to all ports
9. Lifetime warranty

Material: Powder Coated Marine Grade Aluminium, Marine Grade Stainless Steel Components & High Strength Composite.

ACCESSORY: Round connecting plate.

ARM: The standard double socket Arm, has a socket at both ends that accommodates connecting balls. A spring loaded adjustment knob opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: overall length: 94mm. Socket-to-socket length: 76mm.

Base Choices (SELECT YOUR PREFERENCE FROM THE DROP DOWN LIST BELOW):

1. RAM-B-166-202 Cup, arm & round. The RAM twist lock suction cup mount consists of a 3.25" suction cup locking base with a 1" ball attached, a double socket arm and a round plate with drilled hoes including the universal AMPS hole pattern.
2. RAM-B-149Z-202 U-bolt, arm & round. The u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. Included in this package is hardware that accommodates rails from 0.5" to 1.25" in diameter.
3. RAP-B-397-1-202 Small Tough-Clamp base (RAP-B-397-1) + Standard Arm (RAM-B-201) + Round Plate (RAM-B-202). This extremely versatile product from RAM has endless applications and will certainly become one of your most valued tools. The RAM Tough-Clamp™ includes a 1" ball which can be used to mount a variety of products utilising RAM's vast selection of mounting solutions. Attach your GoPro camera, Smartphone, RAM AQUA BOX® Pro or similar light weight device on almost any flat surface, square and round rail. Clamping Dimensions: 1. Flat surfaces and square rails up to 25mm thick. 2. Round rails from 6.35mm to 19mm OD.
4. RAP-B-400-202 Small Tough-Claw (RAP-B-400) + Standard Arm (RAM-B-201) + Round Plate (RAM-B-202). The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round and square bars and rails. The Tough-Claw™ can be clamped on rails from 16mm to 38mm outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more.
5. RAM-B-121-202 Yoke clamp base + standard arm + round plate. The yoke clamp base will fit rails in diameter from 0.625" to a maximum of 1.25". The 1" rubber ball is at a right angle to the plane of the mount; when connected to a rail, the ball sits parallel to the rail.
6. RAP-B-397-2-202 Medium Tough-Clamp (RAP-B-397-2) + standard arm (RAM-B-201) + round plate (RAM-B-202). The RAM Tough-Clamp™ includes a 1" ball which can be used to mount a variety of products utilising RAM's vast selection of mounting solutions. Attach your GoPro camera, Smartphone, RAM AQUA BOX® Pro or similar light weight device on almost any flat surface, square and round rail. Clamping Dimensions: 1. Flat surfaces and square rails up to 44.45mm thick. 2. Round rails from 19mm to 28.5mm OD.
7. RAM-B-127B This clamp base is designed to mount to the lip/edge of a flat surface up to 1.12" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplane. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diameter arm socket and connection plates to create the perfect mount for your application.

Please Note: This holder is not suitable if you are using a case/skin/sleeve with your iPhone. If you wish to leave this on then we recommend the X Grip holder (RAM-HOL-UN7B). It is the sole responsibility of the user to comply with current legislation when mounting these products in vehicles. If your mount kit is likely to be subjected to severe vibration it is advisable to tether your device to the vehicle.